World Print Market - Your top marketplace for used print products
Hier Ihre Werbung schalten

Heidelberger Druckmaschinen AG
KBA Koenig & Bauer Group
Selling Buying


ATD Auto Tracking Densitometer

ID 1655
Categories Measuring Devices | 

Short description ATD Auto Tracking Densitometer
Price (in €) on request

Manufacturer X Rite+GretagMacbeth
Model ---
Year of manufacture 0000
Warranty until ---

Long description ATD Auto Tracking Densitometer

Tighten Quality Parameters While Reducing
Make Ready Time
Designed to measure 4 color process work, the Auto Tracking Densitometer (ATD) helps operators establish firm targets and tolerances for an entire press run using density, dot gain, trap and print contrast color data readings.Then ATD archives these standards for quick and accurate set up during reprints.

Maintain Consistent Color Using Real Time Data
ATD continuously gathers color quality information during the press run and displays data in real time. It also analyzes the data and alerts operators whenever performance falls outside of established tolerances.

• The ATD densitometer measures an entire color bar in just seconds and transmits data to the ATD software. Select from industry standard Status T, Status E, or Status I density response.
• The ATD software displays color data in real time in easy to view graphical formats.
• Powerful software tools continuously analyze density, dot gain, ink trap, print contrast, hue error and grayness.When deviations from targets or tolerances occur, the operator is alerted immediately.
• The ATD helps press operators make timely color adjustments, which results in consistent color quality and minimized waste during the press run.The ATD also identifies the specific ink keys that need to be adjusted.

At the end of each run, the ATD software generates printed reports summarizing the job and detailing color reproduction data, color tolerances, and much more.

The ATD reduces make ready time by automating many steps in the process. This means you need fewer trial and error adjustments.You cut back the run waste for each job. And you operate much more efficiently, which boosts profits. The ATD also gives operators quality control feedback.The ATD locks in color okay information, then displays run data to help press operators maintain color quality within tolerances.The ATD software saves this color data so operators can get repeat jobs or multiple forms up and running quickly.


Product includes Windows® based
data acquisition software, and
several standard, measurable
test image files.

System Requirements
450Mhz or higher class
computer running Windows®
98/NT4/2000, hard drive space for
application and data, and
free serial port for connection
to ATS hardware.

Measuring Geometry
45°/0° per ANSI PH2.17

Light Source
Gas Pressure @ 2850°K

Spectral Sensor
DRS Technology (31pt)

Spectral Range
400nm 700nm

Reflectance Range
0 200%R

Repeatability On White
0.2 ΔE max. ±0.01 Density max.
0.4 ΔE max. ±0.01 Density max. Polarized

Density Reproducibility
±0.02 Density @ 1.5 Density

Density Range
0 2.5D

Scan Spot Size
(Total Scanned Spot)
3.0mm (.118") x 3.5mm (.138") Large
2.3mm (.091") x 3.5mm (.138") Med
1.2mm (.047") x 3.5mm (.138") Small

Polarization Filter
Factory option for Large and
Medium apertures only.

Patch Width (along scan path)
3.8mm (.15") min.

Patch Height
5.0mm (.20") min. Large
3.2mm (.128") min. Med
2.0mm (.078") min. Small

Paper Thickness
1.5mm (.06") max.

Scanning Rate
150mm/sec. (6.8mm patch)
100mm/sec. (4.8 mm patch)

Scanning Width Available
ATS40 standard: 1016mm (40")
Other sizes available to fit
common press configurations.

Color Bar Location
Paper edge to 38mm (1.5")
from edge

Color Bar Alignment
Automatic centering of
measurement on color bar.
Paper set against stop.

Paper Hold Down
Vacuum activated with
measurement command

Power Required Station
110 / 240 VAC, 50 60 Hz, 4/2A

115 / 230 VAC, 50 60 Hz, 4/2A

Weight ---
Dimensions (LxWxH) ---

Location Germany
Region NRW

View this article on the vendor's web site.